Liquid Tight Flexible Metal Conduit Fitting (CE)

View:

Liquid Tight Conduit Fitting, Straight Type, Male Threaded

Liquid Tight Metal Fitting AZ50 series is applied on the relay or end point of wiring system to connect metal conduits, junction box or enclosure for wiring extension and protection. The body is made of zinc alloy with RoHS compliance. The fitting is fixed to the junction box or tapped entries by locknut with male NPT thread system and connected with metal flexible conduit by a nut. The compact structure of this fitting offers feature of moisture and water seal and high tensile resistance to protect the wiring system and benefit to apply to indoor or outdoor environments after assembled with the liquid tight metal flexible conduit series PLTG13PVC and PLTG23PVC.

Liquid Tight Conduit Fitting, Straight Type, Female Threaded

Liquid Tight Metal Conduit Fitting, AZ51 series is applied on the relay point close to the end of wiring system to switch the EMT to metal flexible conduits for convenient termination and complete wiring protection. The body is made of zinc alloy with RoHS compliance. The fitting is fitted to threaded EMT by female NPT thread system and connected with metal flexible conduit by a nut. Widely used in industrial or commercial applications, such as: Machines, Oil Refineries, Chemical Plants, Sewage Treatment Plants, HVAC Systems, Power Supply Systems, Aviation, Automobile, Shipbuilding ... and etc. for wiring protection.

Straight Type, EMT Connector

Straight EMT Connector AZ52 series is applied on the relay point close to the end of wiring system to switch the EMT to metal flexible conduits for convenient termination and complete wiring protection. The body is made of zinc alloy with RoHS compliance. The fitting is fitted to unthreaded EMT by set screw and connected with metal flexible conduit by a nut. Widely used in industrial or commercial applications, such as: Machines, Oil Refineries, Chemical Plants, Sewage Treatment Plants, HVAC Systems, Power Supply Systems, Aviation, Automobile, Shipbuilding ... and etc. for wiring protection.

Liquid Tight Conduit Fitting, Elbow Type, Male Threaded

Liquid Tight Metal Fitting AZ53 series is applied on the relay or end point of wiring system to connect metal conduits, junction box or enclosure for wiring extension and protection. The body is made of zinc alloy with RoHS compliance. The fitting is fixed to the junction box or tapped entries by locknut with male NPT thread system and connected with metal flexible conduit by a nut. This series of connector is designed to 90-degree elbow that is particularly applicable for limited space where the wiring system ended to a junction box or enclosure. The compact structure of this fitting offers feature of moisture and water seal and high tensile resistance to protect the wiring system and benefit to apply to indoor or outdoor environments after assembled with the liquid tight metal flexible conduit series PLTG13PVC and PLTG23PVC.