Flexible Metal Conduit Fitting (UL 514B)

View:

Bx-Flex Conduit Fitting, Set Screw Type

Bx-Flex Conduit Fittings, Set Screw Type, S10/S11/S12/S13/S14/S15/S18/S24 series are certified by UL laboratory according to UL514B. The metal fittings are applied on the relay or end point of wiring system to connect metal conduits, junction box or enclosure for wiring extension and protection. The fitting body is made of zinc alloy with RoHS compliance. The fitting is pushed to fix/fixed to the knockouts of junction box or tapped entries by locknut with external NPS thread system and connected with metal flexible conduit by a set screw and a clip. This series of fitting is proposed to fit with metal flexible conduit series PRWG, PRWA and PSWG.

Bx-Flex Conduit Fitting, Set In Type

Bx-Flex Conduit Fittings, Set In Type, are applied on the relay or end point of wiring system to connect metal conduits, junction box or enclosure for wiring extension and protection. This series of fitting is proposed to fit with metal flexible conduit series PRWG, PRWA and PSWG.

S16 series, Snap-in type, is certified by UL laboratory according to UL514B and Canadian CSA-C22.2 No.56 standard. The body is made of zinc alloy with RoHS compliance. The fitting is pushed to fix to the knockouts of junction box and connected with metal flexible conduit by screwing in.

S17 series is certified by UL laboratory according to UL514B and Canadian CSA-C22.2 No.56 standard. The body is made of zinc alloy with RoHS compliance. The fitting is fixed to the knockouts of junction box or tapped entries by locknut with external NPS thread system and connected with metal flexible conduit by screw in.

S30 series, Snap-in type, is certified by UL laboratory according to UL514B standard. The fitting is applied on the lighting fixture to connect the metal flexible conduit and lampshade or rectifier to protect wires. The body is made of steel 65MN with RoHS compliance. The fitting is pushed to fix to the knockouts of junction box and connected with metal flexible conduit by screwing in.

Bx-Flex Conduit Fitting, Two Screw Type

Bx-Flex Conduit Fittings, Two Screw Type, are applied on the relay or end point of wiring system to connect metal conduits, junction box or enclosure for wiring extension and protection. The body is made of zinc alloy with RoHS compliance. This series of fitting is proposed to fit with metal flexible conduit series PRWG, PRWA and PSWG.

S19 series, Snap-in type, is certified by UL laboratory according to UL514B standard. The fitting is pushed to fix to the knockouts of junction box and connected with metal flexible conduit by tightening the plate with two screws.

S20/S21 series is certified by UL laboratory according to UL514B and Canadian CSA-C22.2 No.56 standard. The fitting is fixed to the knockouts of junction box or tapped entries by locknut with external NPS thread system and connected with metal flexible conduit by tightening the plate with two screws.

Bx-Flex Conduit Fitting, 90 Degree Squeeze

Bx-Flex Conduit Fittings, 90 Degree Squeeze, are applied on the relay or end point of wiring system to connect metal conduits, junction box or enclosure for wiring extension and protection. The body is made of zinc alloy with RoHS compliance. This series of connector is designed to 90-degree elbow that is particularly applicable for limited space where the wiring system ended to a junction box or enclosure. This series of connector is proposed to fit with metal flexible conduit series PRWG, PRWA and PSWG.

S22 series is certified by UL laboratory according to UL514B and Canadian CSA-C22.2 No.56 standard. The squeeze connector is fixed to the knockouts of junction box or tapped entries with external NPS thread system by locknut and connected with metal flexible conduit by squeezed the cover with two screws.

S23 series, Snap-in type, is certified by UL laboratory according to UL514B and Canadian CSA-C22.2 No.56 standard. The squeeze connector is pushed to fix to the knockouts of junction box and connected with metal flexible conduit by squeezed the cover with two screws.

Bx-Flex Conduit Fitting, Screw On Type

Bx-Flex Conduit Fittings, Screw On Type, Snap-in construction, are applied on the lighting fixture to connect the metal flexible conduit and lampshade or rectifier to protect wires. This series of connector is proposed to fit with metal flexible conduit series PRWG, PRWA and PSWG.

S31 series is certified by UL laboratory according to UL514B standards. The body is made of Nylon and the snap part is steel 65Mn with RoHS compliance. The fitting is pushed to fix to the knockouts of junction box and the metal flexible conduit is screwed-in to connect with the fitting.

S32 series is certified by UL laboratory according to UL514B and Canadian CSA-C22.2 No.56 standard. The body is made of steel 65MN with RoHS compliance. The fitting is pushed to fix to the knockouts of junction box and connected with metal flexible conduit by the paw.

S33 series is certified by UL laboratory according to UL514B and Canadian CSA-C22.2 No.56 standard. The body is made of carbon steel Q235 with RoHS compliance. The fitting is pushed to fix to the knockouts of junction box and the metal flexible conduit is screwed-in to connect with the fitting.

Bx-Flex Conduit Fitting, Straight Squeeze

Bx-Flex Conduit Fitting, Straight Squeeze, S25 series. The metal fittings are applied on the relay or end point of wiring system to connect metal conduits, junction box or enclosure for wiring extension and protection. The body is made of zinc alloy with RoHS compliance. The fitting is fixed to the knockouts of junction box or tapped entries by locknut with external NPS thread system and connected with metal flexible conduit by tightening the rings with two screws. This series of fitting is proposed to fit with metal flexible conduit series PRWG, PRWA and PSWG.

Bx-Flex Conduit Fitting, Screw In Coupling

Bx-Flex Conduit Fitting, Screw In Coupling, S26 series is certified by UL laboratory according to UL514B and Canadian CSA-C22.2 No.56 standard. The metal fittings are applied on the relay or end point of wiring system to connect metal conduits, junction box or enclosure for wiring extension and protection. The body is made of zinc alloy with RoHS compliance. The fitting is connected to metal flexible conduits by screwing in. This series of fitting is proposed to fit with metal flexible conduit series PRWG, PRWA and PSWG.