Flexible Metal Conduit Fitting (Low Fire Hazard)-AS

View:

Quick Ass'y, Fixed Type Conduit Fitting

Metal Conduit Fittings AZ01 series is a three-piece straight connector and has been designed to meet with IEC 60423 standard. The AZ01 series is applied on the relay or end point of wiring system to connect metal conduits and junction box or enclosure for wiring extension and protection. The body is made of zinc alloy with RoHS compliance which is connected with metal flexible conduit by screwing in and covering with a nut and fixed to the knockouts of junction box or tapped entries by locknut with optional male thread system, M type, G type or PG type. The concise structure design is benefit for quick and convenient assembly but remain the feature of high tensile resistance at the mean time. Adding an extra grounding ring for grounding purpose. This series of fitting is proposed to fit with flexible metal conduit series PAG13, PAG23, PAS13 and PAS23 with or without plastic jacket.

Quick Ass'y, Rotating Type Conduit Fitting

Metal Conduit Fittings AZ05 series is a four-piece swivel straight connector and has been designed to meet with IEC 60423 standard. The AZ05 series is applied on the relay or end point of wiring system to connect metal conduits and junction box or enclosure for wiring extension and protection. The body is made of zinc alloy with RoHS compliance which is connected with metal flexible conduit by screwing in and covering with a nut and fixed to the knockouts of junction box or tapped entries by locknut with optional male thread system, M type, G type or PG type. The concise structure design is benefit for quick and convenient assembly and swivel structure enable quick and efficient installation but remains the feature of high tensile resistance at the mean time. Adding an extra grounding ring for grounding purpose. This series of fitting is proposed to fit with flexible metal conduit series PAG13, PAG23, PAS13 and PAS23 with or without plastic jacket.

Straight Type, Male Threaded Conduit Fitting

The Straight Type, Male Threaded Conduit Fitting, AZ60 series are applied on the relay or end point of wiring system to connect metal conduits and junction box/enclosure to extend and protect the system. The body is made of zinc alloy with RoHS compliance. The fitting is fixed to the junction box or tapped entries by locknut with G male thread system and connected with metal flexible conduit by a nut. The compact structure of this fitting offers feature of high tensile resistance and moisture/water seal. It can either be fitted with Flexible Metal Conduit-AS series PAG13X and PAS13X or water proof conduit series PAG13, PAS13, PLTG23 and PLTS23 with plastic jacket (PVC/PU/PE/LSZH) to have a water/moisture seal system. That gives the compatibility for both indoor and outdoor environments.

Straight Type, Female Threaded Conduit Fitting

The Straight Type, Female Threaded Conduit Fitting, AZ61 series is applied on the relay point close to the end of wiring system to switch the EMT to metal flexible conduits for convenient termination and complete wiring protection. The body is made of zinc alloy with RoHS compliance. The fitting is fitted to threaded EMT by female G thread system and connected with metal flexible conduit by a nut. Widely used in industrial or commercial applications, such as: Machines, Oil Refineries, Chemical Plants, Sewage Treatment Plants, HVAC Systems, Power Supply Systems, Aviation, Automobile, Shipbuilding ... and etc. for wiring protection.

Straight Type, EMT Connector

The Straight Type, EMT Connector, AZ62 series is applied on the relay point close to the end of wiring system to switch the EMT to metal flexible conduits for convenient termination and complete wiring protection. The body is made of zinc alloy with RoHS compliance. The fitting is fitted to unthreaded EMT by set screw and connected with metal flexible conduit by a nut. Widely used in industrial or commercial applications, such as: Machines, Oil Refineries, Chemical Plants, Sewage Treatment Plants, HVAC Systems, Power Supply Systems, Aviation, Automobile, Shipbuilding ... and etc. for wiring protection.

Elbow Type, Male Threaded Conduit Fitting

The Elbow Type, Male Threaded Conduit Fitting, AZ63 series are applied on the relay or end point of wiring system to connect metal conduits and junction box/enclosure to extend and protect the system. The body is made of zinc alloy with RoHS compliance. The fitting is fixed to the junction box or tapped entries by locknut with G male thread system and connected with metal flexible conduit by a nut. This series of connector is designed to 90-degree elbow that is particularly applicable for limited space where the wiring system ended to a junction box or enclosure. The compact structure of this fitting offers feature of high tensile resistance and moisture/water seal. It can either be fitted with Flexible Metal Conduit-AS series PAG13X and PAS13X or water proof conduit series PAG13, PAS13, PLTG23 and PLTS23 with plastic jacket (PVC/PU/PE/LSZH) to have a water/moisture seal system. That gives the compatibility for both indoor and outdoor environments.